Conserving battery power
●Tap the Power saver power plan through Power Options under System and Security in Windows Control Panel.
●Turn off wireless and local area network (LAN) connections and exit modem applications when you are not using them.
●Disconnect unused external devices that are not plugged into an external power source.
●Stop, disable, or remove any external media cards that you are not using.
●Decrease screen brightness.
●Before you leave your work, initiate Sleep or Hibernation, or shut down the Slate.
Using external AC power
External AC power is supplied through an approved AC adapter or an HP Slate Dock.
WARNING! To reduce potential safety issues, use only the AC adapter provided with the Slate, a replacement AC adapter provided by HP, or a compatible AC adapter purchased from HP.
Connect the Slate to external AC power under any of the following conditions:
WARNING! Do not charge the battery while you are onboard aircraft.
●When charging or calibrating a battery
●When installing or modifying system software
●When writing information to an optional external drive
●When running Disk Defragmenter
●When performing a backup or recovery
When you connect the Slate to external AC power, the battery begins to charge.
When you disconnect external AC power, the Slate switches to battery power.
Connecting the AC adapter
WARNING! To reduce the risk of electric shock or damage to the equipment:
Plug the power cord into an AC outlet that is easily accessible at all times.
Disconnect power from the Slate by unplugging the power cord from the AC outlet (not by unplugging the power cord from the Slate).
If provided with a
To connect the Slate to external AC power, follow these steps:
1.Plug the AC adapter into the power connector (1) on the Slate.
2.Plug the power cord into the AC adapter (2).
Using external AC power 33