Summary
You have just learned how to make a simple timing measurement with the HP 16510B logic analyzer. You have:
∙specified a timing analyzer
∙assigned pod 1
∙assigned bits
∙assigned labels
∙specified a trigger condition
∙learned which probes to connect
∙acquired the data
∙configured the display
∙set the s/Div for best resolution
∙positioned the markers for the measurement answer
You have seen how easy it is to use the timing analyzer to make timing measurements which you could have made with a scope. You can use the timing analyzer for any timing measurement that doesn’t require voltage parametrics or doesn’t go beyond the accuracy of the timing analyzer.
The next chapter teaches you how to use the state analyzer. You will go through a simple state measurement in the same way you did the timing measurement in this chapter.
Using the Timing Analyzer | HP 16510B |
7 - 14 |
|