Button board
Description | Spare part number |
|
|
Button board (includes cable, power button actuator, and volume button actuators) | |
|
|
Before removing the button board, follow these steps:
1.Shut down the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the tablet.
3.Disconnect the power from the tablet by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the tablet.
4.Remove the back cover (see Back cover on page 18).
5.Remove the middle frame (see Middle frame on page 20).
6.Disconnect the battery cable from the system board (see Battery on page 21).
Remove the button board:
1.Release the ZIF connector (1) to which the button board cable is attached, and then disconnect the button board cable from the system board.
2.Remove the button board (2) and cable.
Reverse this procedure to install the button board.
Button board 27