Read Me First
for the HP ProCurve Routing Switches 9304M, 9308M, and
Covering Software Release 05.2.14 (or Later)
Contents:
■Software Updates Are Free!
■New Software Release 05.2.14
■Module Installation
■Getting Started
■Your Free Ticket to Proactive Networking
■Accessory Parts List
■Operating Notes, Troubleshooting, and Errata
Warning: Do not use the handles on the power supply units to lift or carry the routing switch.
Software Updates Are Free!
Help Us Help You...Register Now To Keep
Register for Automatic Notification of Updates. From the Free Software Updates page you can also register yourself to automatically receive email notice of new updates for your managed HP ProCurve networking products. Just follow the instructions on that page for how to receive the update notices.
To determine whether you have the latest software, compare the software version that is available on the website with the version that is currently installed in your switch or routing switch. To load a new software image, see chapter 4, "Updating Software Images and Configuration Files", in the manual you received with the switch or routing switch.
Note that current product documentation, plus any supplements describing how to use any recently released software updates are also available on the above website (click on Technical Support, then Manual).
New Software Release 05.2.14 (or Later) Is Now Available with the Following New Features
• Support for Redundant Management Modules | • Faster BGP4 route update convergence time | |||
| – | Increased Default Maximum Number of IP Routes | • SNMP and Syslog Message Enhancements | |
| – | Larger Default Maximum Number of BGP4 Neighbor Prefixes | • | More Layer 2, Layer 3, and System Level Enhancements |
• | • | Software Fixes | ||
• | Enhanced show tech command |
|
| |
For more information, refer to the documentation shipped with the switch or routing switch, or to Release Notes for Version 05.2.14 of the HP ProCurve Routing Switches 9304M, 9308M, and