Operating Instructions

1)When first operating the dehumidifier, run it in Continuous mode for 24 hours.

2)Power On and Off - Press the POWER button once to manually turn the unit on. Press the POWER button once more to turn the unit off.

3)Humidity Selection - Press the “+” or “-”buttons to choose the desired relative humidity in the room. Each press of the button will change the desired room humidity by 5%. The room humidity is selectable from 35%-80% or continuous. The unit will cycle on and off to maintain the humidity level chosen on the digital display. If you want the dehumidifier to operate continuously regardless of the room humidity, press the (-) buttons until you see “CO” on the digital display. This will enable continuous operation and the “Continue” indicator will light up on the control panel.

4)Fan Speed Control - Press the FAN SPEED Button to cycle through the different fan speeds: High, Medium, and low. The fan speed can be visually distinguished by the fan speed indicators on the control panel.

5)Timer - To program the unit to automatically turn off, press the TIMER button when the unit is on. You can select either 2 or 4 hours with the Timer. Once the desired time (2 or 4 hours) is over, the unit will automatically shut down.

6)Bucket Full - When the water bucket is full of water, the unit will automatically shut off , make a beeping noise, and the Bucket Full Indicator will light up. The dehumidifier will not function until the water bucket is emptied and placed back inside the unit. The bucket should be cleaned every few weeks to pre- vent the growth of mold, mildew and bacteria. Use a mild detergent to clean the bucket. Once clean, com- pletely dry the bucket and place it back inside the dehumidifier.

NOTE: Support bucket with both hands when emptying

7) Clean Filter - When the filter needs to be cleaned, the filter indicator will light up. Remove the filter and clean with warm, soapy water. Dry thoroughly be- fore replacing the filter. Once the filter is completely dry, place the filter back in the unit and press the FILTER button to reset the filter indicator.

If the filter is torn or unusable, order a new filter by calling our customer service.

NOTE: When the bucket is full or removed from the machine, the compressor will turn off, but the fan will continue to run for a few minutes. This is com- pletely normal. The dehumidifier will not be removing moisture from the air at this time.