HP 531671-001 manual Connection length requirements, Troubleshooting table, Problem Solution

Page 45

Troubleshooting

Connection length requirements

The HP KVM Server Console Switch G2 offers optimum video performance when the distance between the server and console switch is 15 m (50 ft) or less (1280 x 1024 at 75 Hz). The system is capable of operation at distances up to 30 m (100 ft) at reduced video resolutions (800 x 640 at 60 Hz, worst case).

Distance

1280 x 1024

1024 x 768

800 x 640

 

 

 

 

15.24 m (50 ft)

X

X

X

 

 

 

 

22.86 m (75 ft)

—

—

X

 

 

 

 

30.48 m (100 ft)

—

—

X

 

 

 

 

Troubleshooting table

Problem

Solution

 

 

The local user cannot view the OSD copyright

• Be sure that the power source is valid.

notice.

• Be sure that the cables are connected properly.

The OSD copyright notice is distorted.

• Be sure that the monitor is valid.

 

 

 

The local user cannot view the OSD flag.

Preview the preferences in the OSD to determine if the

 

local port display has been disabled or set to time out. If

 

the preferences are set to not display the OSD flag or to

 

have the flag time out, then the OSD flag does not appear.

 

 

The local user cannot activate or view the OSD,

Be sure that the local port keyboard is connected properly

and the OSD flag disappears.

and that the keyboard is valid.

 

 

The OSD is distorted or not readable on the

Be sure that the monitor supports the refresh rate to which

local port video display.

target server is set.

 

 

The activity indicator light ("Console switch

• Be sure that the console switch is powered on and that

components" on page 11) does not display

the power source is valid.

when the console switch is powered on.

• Be sure that the cables are connected properly

 

 

 

The system does not recognize the HP IP Console

All HP IP Console Switches must be upgraded with

Switch.

firmware version 3.0.0 or later.

 

 

The console switch system is inaccessible

Call the HP Customer Support Center ("HP contact

because the password is lost.

information" on page 47).

 

 

Video displays are all green or red.

• Check the UTP CAT5 cable for breaks or bad crimps.

 

• Check the VGA connection for bent pins.

 

 

The screen saver does not turn on.

Be sure to click OK to confirm the screen saver selection.

 

Click X or press the Esc key to cancel the command.

 

 

Troubleshooting 45

Page 44 Page 46
Image 45
Page 44 Page 46
Contents Part Number March 2009 First Edition HP KVM Server Console Switch G2 User GuideIntended audience Contents Upgrading the firmware Connection length requirements Troubleshooting tableBefore you contact HP HP contact information Regulatory compliance noticesInstalling the HP KVM Server Console Switch G2 Installation checklistOverview Performing a standard-mount installation Rack-mounting the console switchPerforming a cantilever-mount installation Performing a side-mount installation Installing the HP KVM Server Console Switch G2 Description Console switch componentsConnecting the local console switch Connecting the interface adapters Installing a PS/2 or USB interface adapterInterface adapter overview To add server names, see Assigning names to servers onCascading console switches Compatible console switch modelsHP IP Console Switch Example of an HP IP Console Switch cascade configuration Cascading console switches Local port operation Accessing the Main dialog boxViewing servers Viewing the Port columnButton Description Soft switching to a server Soft switchingSelecting servers Viewing the Server Status columnConfiguring switches for soft switching Using basic OSD navigation keysSoft switching to a previous server Disconnecting from a serverAccessing the Setup dialog box Configuring the Setup dialog boxManaging routine tasks for servers FunctionChanging the display behavior Accessing the Menu dialog boxSelecting the display order of servers Button FunctionSelecting and setting the OSD hot key command Setting a screen delay timeControlling the status flag Accessing the Flag dialog box Displaying the status flagFlag Description Broadcasting to servers Accessing the Broadcast dialog boxActivating the Broadcast dialog box Broadcasting keystrokesBroadcasting mouse movements Setting up a scan patternAccessing the Scan dialog box Adding servers to the scan listRemoving servers from the scan list Setting local console switch security Activating Scan modeDeactivating Scan mode Changing the password Accessing the Security dialog boxSetting password protection Logging in to the console switchRemoving the password protection Resetting a console switch passwordEnter the password, and then click OK Exiting screen saver mode Configuring the Switch and Share modesActivating Screen Saver mode without password protection Deactivating the screen saverAccessing the Switch dialog box Setting the Switch and Share modesChanging the keyboard language Setting the OSD interface language Accessing the Keyboard dialog boxSelecting the keyboard language Assigning device types Accessing the Devices dialog boxModifying device types Accessing the Names dialog boxAssigning names to servers Assigning server namesManaging console switch tasks using the OSD Accessing the Commands dialog box Running system diagnosticsActivating Run Diagnostics Device Reset Accessing the Version dialog boxDisplaying version information Upgrading the console switch firmware Upgrading the firmwareUpgrading the interface adapter firmware Loading interface adapter firmware individually Upgrading interface adapter firmware simultaneouslyUpgrading the firmware Decommissioning an interface adapter Troubleshooting table TroubleshootingProblem Solution Connection length requirementsS02345respawnsbin/agetty -h ttyS0 Technical support Before you contact HPHP contact information Regulatory compliance notices Regulatory compliance identification numbersFederal Communications Commission notice Cables ModificationsEuropean Union regulatory notice Canadian notice Avis CanadienPower cord statement for Japan Japanese notice Korean noticeClass a equipment Class B equipment Acronyms and abbreviations Index Index
Top Page Image Contents