<DIR_USER_CONTEXT_2 VALUE="_"/>
<DIR_USER_CONTEXT_3 VALUE=""/> </MOD_DIR_CONFIG> <MOD_NETWORK_SETTINGS> <SPEED_AUTOSELECT VALUE="Y"/> <NIC_SPEED VALUE="100"/> <FULL_DUPLEX VALUE="Y"/> <IP_ADDRESS VALUE="XX.XXX.XXX.XX"/> <SUBNET_MASK VALUE="xxx.xxx.xxx.x"/> <GATEWAY_IP_ADDRESS VALUE="XX.XXX.XXX.X"/> <DNS_NAME VALUE="ILOD234KJ44D002"/> <PRIM_DNS_SERVER value="xx.xx.x.xxx"/> <DHCP_ENABLE VALUE="Y"/>
<DOMAIN_NAME VALUE="americas.cpqcorp.net"/> <DHCP_GATEWAY VALUE="Y"/> <DHCP_DNS_SERVER VALUE="Y"/> <DHCP_STATIC_ROUTE VALUE="Y"/> <DHCP_WINS_SERVER VALUE="Y"/> <REG_WINS_SERVER VALUE="Y"/> <PRIM_WINS_SERVER value="xx.xx.x.xxx"/>
<STATIC_ROUTE_1 DEST="0.0.0.0" GATEWAY="0.0.0.0"/> <STATIC_ROUTE_2 DEST="0.0.0.0" GATEWAY="0.0.0.0"/> <STATIC_ROUTE_3 DEST="0.0.0.0" GATEWAY="0.0.0.0"/> </MOD_NETWORK_SETTINGS>
<ADD_USER
USER_NAME="Administrator"
USER_LOGIN="Administrator" PASSWORD=""> </ADD_USER>
<ADD_USER
USER_NAME="Landy9"
USER_LOGIN="mandy9" PASSWORD=""> </ADD_USER> <RESET_RIB VALUE="Y"/> </HPONCFG>
For security reasons, the user passwords are not returned.
Obtaining a specific configuration
A specific configuration can be obtained using the appropriate XML input file. For example, here are the contents of a typical XML input file, get_global.xml:
<LOGIN USER_LOGIN="x" PASSWORD="x"> <RIB_INFO MODE="read"> <GET_GLOBAL_SETTINGS /> </RIB_INFO>
</LOGIN>
</RIBCL>
The XML commands are read from the input file get_global.xml and are processed by the device:
/opt/hp/tools # ./hponcfg
The requested information is returned in the log file, which, in this example, is named log.txt. The contents of the log file are shown below:
<GET_GLOBAL_SETTINGS> <SESSION_TIMEOUT VALUE="30"/> <ILO_FUNCT_ENABLED VALUE="Y"/> <F8_PROMPT_ENABLED VALUE="Y"/>
HPONCFG utility 7