HP Prepress Software manual Installation, Requirements, Computer hardware and software

Page 9

2Installation

Requirements

Computer hardware and software

●Intel Core i3 2.4 GHz with 4 virtual cores/threads, or equivalent or better processor

●4 GB of RAM, or more

●3.5 GB of free space on hard disk, or more, plus 100 MB for each additional printer added

●Screen resolution of 1280 × 1024 pixels, or more, tuned or calibrated to sRGB for optimal Crystal Preview performance

●Ethernet network, IPv4 or IPv6, 100 Mb/s or faster

●Microsoft Windows 7 or 8 (32- or 64-bit)

Ensure that your computer is connected to the same subnet as your printers. Otherwise, ensure that computer and printers are able to communicate through the 8080, 8085, 8086, 9100 TCP, and 161 UDP ports.

How can I improve the performance of HP Designjet SmartStream?

If you feel the need of improvement, the performance of the application can be improved by exceeding the minimum specifications above: more than 4GB of RAM (which requires a 64-bit operating system), a faster processor with more cores, a faster network, and a faster hard disk drive (ideally a solid-state drive).

Supported printers

HP Designjet SmartStream currently supports the following printers:

●HP Designjet T7200 Production printer

For documentation and other support, see http://www.hp.com/go/T7200/support.

●HP Designjet T7100 printer (but not HP Designjet T7100 Monochrome)

For documentation and other support, see http://www.hp.com/go/T7100/support.

●HP Designjet T3500 Production eMFP

For documentation and other support, see http://www.hp.com/go/T3500/support.

●HP Designjet Z6200 Photo Production printer (42 in and 60 in)

For documentation and other support, see http://www.hp.com/go/Z6200/support.

●HP Designjet Z6600 Production printer

ENWW

Requirements 5

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Designjet SmartStream Trademarks Table of contents Color management Job history Introduction What is it for?What do I see on the screen? Getting startedNotifications How can I adjust the HP Designjet SmartStream window?Introduction Requirements InstallationComputer hardware and software Supported printersUpdate your printer’s firmware Install the licenses How to installHow to install the Preflight Manager license Supported file types LicensingHow to install the Print Controller license Add the first printer Install the HP Designjet SmartStream applicationAdd a printer PrintersRemove a printer Change a printer’s IP addressPrinters pane Enww Accessory status Folder statusStacker status Enww Set preferences General preferencesPrinter-specific preferences Enww Minimize roll switches Use roll with less paper Job preparation File error detection Problems that prevent printingHP Designjet SmartStream Preflight Manager Problems that do not prevent printing Resolution CenterAutomatic attribute detection and setting assignment Job options Edit a jobOptions Filter pages Extract pagesRemove pages Move a job to another printer Sort pagesRemove a job Print settingsGeneral settings CroppingOptions Paper source options How can I use the stacker options? Advanced optionsImage, page, and roll Print previewCrystal Preview Preview featuresCrystal Preview for glossy paper Crystal Preview showing what will be printed Submit jobs for printing PrintingFiltered and unchecked pages Printing queueJob status Printing interruptionsExit the application while printing Cancel jobsColor management Supported color spacesColor options Job history Reconfigure a jobSearch the job history Reprint a jobRemove jobs from the job history Folding Enww Scanning Error code Short description Full description TroubleshootingIndex
Related manuals
Manual 9 pages 34.88 Kb
Top Page Image Contents