Getting Started | HP Jetsend for Windows CE Devices instruction

Getting

Started

Why install JetSend® for Windows CE Devices?

Installing JetSend for Windows CE Devices lets you take advantage of JetSend communications protocol on your Microsoft® Windows® CE-based device. With JetSend for Windows CE Devices loaded, you can exchange documents, images, email, appointments, tasks, and contact information with any other JetSend-enabled device—no cables or special drivers needed.

Requirements for installation

The following table lists requirements for installing JetSend for Windows CE Devices on your mobile device.

INSTALLATION REQUIREMENTS

Mobile device	Storage memory for installation: 800 KB for
	handheld PCs; 1300 KB for palm-size PCs.
	Total memory (minimum) for operation: 4 MB
	(The amount of memory used during operation
	depends on the complexity of the document you
	are exchanging.)
	Microsoft Windows CE: Version 2.11 or greater.
	Infrared capability: Infrared Data Association
	(IrDA) 1.2. FIR (Fast Infrared) transfer speed is
	recommended for best performance.

Desktop	Windows 95, Windows 98, or Windows NT
computer	Workstation 4.0.
	Synchronization: Microsoft Windows CE
	Services 2.2 or ActiveSync 3.0.
	JetSend for Windows CE Devices setup
	program.