Installing HP-UX Internet Express

•If you want to install Wireshark A.09.00-0.99.5.003 on a HP-UX 11i version 1 system, ensure that PHSS_33035 ld(1) and linker tools cumulative patch are installed in your system.

•If you want to install Condor A.09.00-6.8.4, ensure that the following patches are installed on your system:

—PHCO_25568: s700_800 11.11 libnss_files cumulative patch. This patch is required for resolving hostnames from files.

—PHNE_27796: s700_800 11.11 libnss_dbs DNS backend patch. This patch is required for resolving hostnames from DNS.

Follow these steps to install HP-UX Internet Express:

1.If you are installing HP-UX Internet Express components from the HP-UX Internet Express CD/DVD:

a.If you are installing HP-UX Internet Express components on systems currently running HP-UX 11i v1, follow these steps:

i.Install the patches PHKL_26269, PHKL_28025, and PHCO_25841 to enable long filename support. You can download these patches from any of the following locations:

•The GOLDBase11i bundle on the Support Plus CD (June 2003 or later) for HP-UX 11i v1

•The IT Resource Center Web site: http://itrc.hp.com

•The anonymous IT Resource Center FTP site: ftp://ftp.itrc.hp.com

b.Insert the HP-UX Internet Express CD/DVD into the CD drive.

NOTE: While mounting the HP-UX Internet Express CD/DVD, you must invoke the mount command using the -orroption to recognize and read long filenames.

c.Mount the Internet Express CD/DVD on your system. The parameters for mounting your CD/DVD may vary. An example command for mounting the HP-UX Internet Express CD/DVD is as follows:

$ mount -orr /dev/dsk/c0t0d0<depot-path>

The <depot-path>must be an empty directory.

2.If you are installing HP-UX Internet Express components from HP Software Depot, see http://www.hp.com/go/softwaredepot and download the <component-name>.depot files to install.

20 Installing HP-UX Internet Express