Contents

CAUTION
All units must be installed by a licensed contractor or technician.
Installation must be in accordance with this manual,NEC,State and Local Codes.
Otherwise unit warranty will be void and serious damage to person and/or property may
occur.
Read all instruction manuals thoroughly before attempting installation.
The Manufacturer shall NOT be liable for any damages or loss due to	improper
installation or operation or natural disasters.
Do not power the unit until all wiring,refrigerant tubing and refrigerant charging has been
checked and tested.
Units must be grounded per current NEC,State and Local Codes.
Wiring connections must be tightly secured to all terminals.Loose connections can
result in electrical arcing,overheating and potential fire hazards.
CONTENTS
Safety Precautions	1
Identification of Parts	2
Remote Controller	4
Operation Instructions	7
Maintenance	9
Protection	10
Troubleshooting	11
Installation Instructions	12

Preparation Before Use

Before using the air conditioner, be sure to check and pre-set the following.

Remote Controller Pre-setting

The remote controller is NOT preset and should be set by owner.

Each time after the remote Control batteries are replaced, or is energized, the symbol will flash from Cool and HEAT alternatively.

User can preset the remote control type depending on the air conditioner type you have purchased as follows :

Press any button when the heating symbol flashes ,then Heat Pump is set.

Press any button when the cooling symbol flashes ,then Cooling Only is set.

If you dont' press any button within 10 seconds, the remote controller is pre-set as Heat Pump automatically.

Note:

If the air conditioner you purchased is a Cooling Only one, but you pre-set the remote controller as Heat Pump, it will operate properly in cooling.. But if the air conditioner you purchased is a Heat Pump one, and you preset the remote controller as Cooling Only, then you CAN NOT preset the Heating operation with the remote controller.

Auto-restart Pre-setting(optional):

the air conditioner is preset as Auto-restart function by manufacturer.If Auto-restart function is not needed, follow the steps below to cancel this function:

1)Make sure the air conditioner power is turned off at remote control.

2)Keep pressing the Emergency button for more than 10 seconds until four short beeps are heard.

Then Auto-restart function is disabled. To activate the Auto-restart function, repeat above procedure until three short beeps are heard.

--This air conditioner is not intended for use by young children or handicapped persons unless they have been adequately supervised by a responsible person to ensure that they can use the air conditioner safely

--Young children should be supervised to ensure that they do not play with the air conditioner.

3119233, KFTHP-24-ID, KFTHP-24-OD, KFTHP-18-ID, KFTHP-12-ID specifications

Soleus Air, a recognized leader in the home heating and cooling industry, has introduced a series of advanced heat pump models designed to provide efficient and versatile climate control solutions. The KFTHP-24-OD, KFTHP-18-OD, KFTHP-24-ID, 3119233, and KFTHP-18-ID are some of the standout products in this range. Each model boasts unique features and technologies catering to various heating and cooling needs.

One of the key highlights of these models is their high energy efficiency ratings. With SEER ratings that meet or exceed established standards, the Soleus Air heat pumps are designed to lower energy bills while providing optimal performance. The inverter technology integrated into these units ensures that they adjust their operation according to the changes in temperature, allowing for precise climate control and further energy savings.

Soleus Air has prioritized user convenience in the design of these heat pumps. Many models include a user-friendly remote control that allows homeowners to adjust settings from anywhere in the room. Additionally, some units feature a programmable timer and various fan speed options, making it easy to customize comfort levels according to individual preferences.

Another impressive feature is the quiet operation of these heat pumps. Designed with sound-dampening technology, the units minimize noise levels, allowing for peaceful indoor environments. This makes them an ideal choice for bedrooms, offices, or any personal space where quiet is essential.

The versatility of the KFTHP series is evident in their ability to provide both heating and cooling functions, making them suitable for year-round climate control. The units can efficiently reverse the refrigeration cycle to provide warmth during winter while effectively cooling down spaces in the summer months.

Installation is straightforward with the KFTHP models, as they come with comprehensive user manuals and support. The compact design of these units makes them adaptable for various room sizes, ensuring that efficient climate control is accessible in both residential and commercial settings.

In summary, the Soleus Air KFTHP-24-OD, KFTHP-18-OD, KFTHP-24-ID, 3119233, and KFTHP-18-ID heat pumps are excellent investments for those seeking efficient heating and cooling solutions. Their energy efficiency, user-friendly features, quiet operation, and versatility make them standout choices for consumers looking to enhance their indoor comfort.

3119233, KFTHP-24-ID, KFTHP-24-OD, KFTHP-18-ID, KFTHP-12-ID specifications