HP 5500 C, 4570 C manual Remove the top cover

Page 6

remove the top cover

After unscrewing the top cover, you are ready to remove it.

top cover being removed

9Carefully lift the top cover off the base. Lift the back of the top cover first then pull it out of the front bezel (bezel is referred to end containing the buttons and back is opposite of buttons). Turn the top cover upside down and set it on a clean surface

Dust will immediately begin accumulating in your scanner now that the top cover is off. Minimize the time the scanner base is exposed. Read all directions and have the necessary tools ready before removing the top cover. While the top cover is off do not leave the scanner unattended.

Static discharge from your fingers, hand, or tools will damage the circuit boards inside your scanner. Do not touch anything inside the scanner base.

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Glass cleaning hp scanjet 4570c/5500c scanner Page Preparation Clean top of the scanner Remove the scanner lidBegin disassembly only after completing steps 1 through Un-fasten the top coverRemove the top cover Cleaning Clean the glassReassembly Re-mount the top cover to the scanner Insert the screws Insert the scanner lidReconnect your scanner
Top Page Image Contents