OPERATION
Selecting the Paper Path
Operate the paper path lever on the lower left side up the front of the printer to select the paper path.
Pushing the lever up causes the paper to be ejected in the tray on the top.
Pushing the lever down causes the paper to be ejected from the font of the printer.
Do not operate the lever during copying as this could cause paper jams.
If there are many copies, to be printed use the paper eject tray on the top.
Up � |
Down |
Attaching the toner cartridge
To attach the toner cartridge, first remove the toner cartridge from the package. (Keep the package in a safe place for
Hold the cover with both hands and pull toward you to open.
Shake the toner cartridge well to evenly distribute the toner in the cartridge.
Hold the ends of the sealing tape attached
to the side of the cartridge and pull it to completely remove the tape from the cartridge. The length of the tape after removal is 490 mm (19.3 inches) or twice the length of the cartridge.
While grasping the handle on the cartridge (so that the arrow is facing the printer side), insert the cartridge in the printer. Be sure that the ends of the cartridge match the groove on the black plastic section. Insert the cartridge all the way to the back and close the printer cover.
6