HP 7500A manual Send a standard fax, Send a fax from an extension phone

Send a standard fax

1.Load the document you want to fax in the printer.

You can fax either from the automatic document feeder (ADF) or from the scanner glass.

2.Touch Fax.

3.Enter the fax number by using the keypad.

Tip: To add a pause in the fax number you are entering, touch *@ repeatedly, until a dash (-) appears on the display.

4.Touch Start Black or Start Color.

Tip: If the recipient reports issues with the quality of the fax you sent, you can try changing the resolution or contrast or your fax.

English

Send a fax from an extension phone

1.Load the document you want to fax in the printer.

You can fax either from the automatic document feeder (ADF) or from the scanner glass.

2.Touch Fax.

3.Dial the number by using the keypad on the phone that is connected to the printer.

Note: Do not use the keypad on the control panel of the printer when manually sending a fax. You must use the keypad on your phone to dial the recipient’s number.

4.If the recipient answers the telephone, you can engage in a conversation before sending the fax. When you’re ready to send the fax.

Note: If a fax machine answers the call, you will hear fax tones from the receiving fax machine. Proceed to the next step to transmit the fax

5.When you are ready to send the fax, touch Start Black or Start Color.

Note: If prompted, select Send Fax.

If you were speaking with the recipient before sending the fax, inform the recipient that they should press Start on their fax machine after they hear fax tones. The telephone line is silent while the fax is transmitting. At this point, you can hang up the telephone. If you want to continue speaking with the recipient, remain on the line until the fax transmission is complete.

Set up and use fax 13