Using Your AIR Conditioner | Soleus Air SG-WAC-08ESE-C guide

USING YOUR AIR CONDITIONER (Cont.)

•Freezing Conditions: This is a cooling only air conditioner. It is not designed for freezing outdoor conditions. It must not be used in freezing outdoor conditions.

•Remote Control: To ensure proper operation when using the remote control, aim the remote directly at the signal receiver on the air condi- tioner.

•The remote control has a signal range up to 20 feet.

•Make sure nothing is blocking the remote con- trol signal from being received by the air con- ditioner.

•Make sure the batteries are installed correctly and still have power.

•Cooling Mode: Use the COOL mode at Low, Me- dium, High, or Auto Fan speed when cooling is needed. Use the temperature ▲/▼ buttons to set the desired temperature between 64°F and 86°F.

•Once the temperature is set, the compressor will cycle on and off to keep the room temperature at the set temperature level. The lower the set thermostat temperature, the cooler the room will become. The higher the set thermostat temperature, the warmer the room will become.

•For Normal Cooling - Set the Mode to Cool and the Fan to High or Med with the termperature set in the middle.

•For Maximum Cooling - Set the Mode to Cool and the Fan to High with a lower set temperature.

•For Quieter & Nighttime Cooling - Set the Mode to Cool and the Fan to Low with the temperature set in the middle.

NOTE: If the air conditioner is off and is then turned on while set to a Cool setting or if turned from a fan setting to a Cool setting, it may take approximately 3 minutes for the compressor to start and cooling to begin.

•Fan Only Mode: Use Fan Only mode at Low,

Med, or High fan speed to provide air circulation and filtering without cooling. Since fan only setting do not provide cooling, a Set temperature cannot be entered. The room temperature will appear in the display.

NOTE: Auto Fan Speed cannot be used in Fan Only mode.

•Loss of Power Protection: If power to the air conditioner is lost or interrupted, the air condi- tioner will automatically re-start in the setting last used prior to power loss. If the Timer was set to automatically turn the air conditioner off or on, it will resume countdown at the amount time left prior to power loss. You may need to set a new time if desired.

•Air Direction: Use the lever on the front air vents to adjust the direction of the airflow. You can di- rect the airflow left, right, up or down. The lever is located on the right side of the air vent.

•Energy Saver Mode - Controls the Fan

On - The fan will cycle on and off with the compressor. This results in winder variations of room temperature and humidity. Normally used with the room is unoccupied. NOTE: The fan may continue to run for a short time after the compressor cycles off.

Off - The fan runs all the time in fan or cooling mode.

SG-WAC-06ESE-C, SG-WAC-08ESE-C specifications

Soleus Air has made a significant mark in the HVAC industry, particularly with its line of window air conditioning units designed for efficient cooling solutions. Two notable models from this range are the Soleus Air SG-WAC-08ESE-C and SG-WAC-06ESE-C. Each unit boasts innovative features and technologies aimed at enhancing user comfort and energy efficiency.

The Soleus Air SG-WAC-08ESE-C is a robust 8,000 BTU unit ideal for cooling spaces up to 350 square feet. It incorporates several key features, including a programmable timer that allows users to set the unit to turn on or off at specific times. This feature is particularly beneficial for those who want to return to a cool environment after a long day. The unit also includes a remote control, enabling convenience and ease of use from a distance.

The SG-WAC-08ESE-C utilizes a three-speed fan and multiple cooling settings, allowing users to tailor the airflow to their comfort needs. Energy efficiency is a hallmark of this model, as it comes with an Energy Efficiency Ratio (EER) rating that helps to minimize electricity usage without compromising performance. Additionally, its energy-saving mode adjusts the cooling intensity based on the room temperature, leading to lower energy bills.

On the other hand, the Soleus Air SG-WAC-06ESE-C is designed with 6,000 BTU of cooling power, making it suitable for spaces up to 250 square feet. Much like its counterpart, it also features a programmable timer, remote control, and three-speed fan settings for customizable comfort. The energy-efficient design of the SG-WAC-06ESE-C helps users manage their energy consumption effectively, highlighting Soleus Air's commitment to environmentally friendly technology.

Both models come with a built-in dehumidifier function that efficiently reduces humidity levels, making them perfect for humid climates. They are designed for easy installation, and their sleek appearance complements various room decors. The units are equipped with user-friendly interface controls, ensuring that adjustments can be made effortlessly.

In conclusion, the Soleus Air SG-WAC-08ESE-C and SG-WAC-06ESE-C are excellent choices for individuals seeking reliable and efficient window air conditioning solutions. With their user-centric features, energy-saving technologies, and effective cooling capabilities, these models reflect Soleus Air's dedication to comfort and sustainability.