Unpack your hp printer, Be sure to insert the HP

hp photosmart 7350

1 unpack your hp printer

Photosmart CD before you connect the printer to your computer with the USB cable.

Printer	Setup Guide

Power cord

Print cartridge protector

1.Lift the OUT tray.

2.Pull out the paper length guide on the IN tray.

3.Slide the paper width guide as far to the left as it will go.

4.Move the photo tray slider toward you until it stops. This disengages the photo tray.

5.Place a stack of plain paper into the IN tray.

6.Adjust the paper width guide and paper length guide to fit close to the edges of the paper without bending the paper.

7.Lower the OUT tray.

1.OUT tray

1.	Press the Power button to turn the printer on.
2.	Open the top cover. The print cartridge cradle moves to the center of the printer.
3.	Pop open both of the print cartridge cradle latches by pulling the bottom of the

Be sure to purchase an HP #56 black print cartridge separately.

• To print text documents faster and better, replace

the photo print cartridge in the right stall with an

	latch out.
4.	Remove the plastic tape from each print cartridge.
5.	Insert the HP #57 tri-color print cartridge in the left stall.
	Insert the HP #58 photo print cartridge in the right stall.
6.	Close both print cartridge cradle latches by pulling the bottom of the latch out,
	pressing down, then releasing the latch.
7.	Close the top cover. Press the OK/Yes button. A calibration page prints
	automatically. This verifies that the print cartridges are installed correctly.

3.Print cartridge cradle latch

Do not touch the ink nozzles or the copper contacts!

Copper contacts

7. Calibration page

HP #56 black print cartridge.

• To go back to printing beautiful photos, remove

the black print cartridge and reinstall the HP #58

photo print cartridge in the right stall.

Store the unused print cartridge in the protector that came with your printer.

Q1603-90187