HP Opti PRO Opti PRO CD/DVD manual Calibration

OptiPrinter PRO CD/DVD Inkjet Printer

10.6Calibration

Your OptiPrinter PRO comes from the factory pre-calibrated to print the image in the centre of the CD. However, during the life of the printer it may be necessary to recalibrate it to ensure a perfect image position on the CD. This tab allows you to fine-tune the position of the printed image with the CD.

Fig. 23

Note:

In order to set the calibration, the OptiPrinter Pro must be attached to your PC via the USB cable. Calibration will not work if the printer is connected via the parallel port.

Click the Set Print Position button, the Calibration Screen appears (See Fig. 24).

Fig. 24

ZZ 004 821 - 23 -