Soleus Air SG-WAC-12HCE manual THRU-THE-WALL Installation, Installing the Chassis into the Cabinet

Page 11

ASSEMBLY & INSTALLATION (CONT.)

Installing the Chassis into the Cabinet

1.Team lift (two people) the air conditioner chassis and carefully slide it into the cabinet. Let the front of the air conditioner hang out approximately 6”.

2.CAUTION: DO NOT PUSH ON THE CONTROLS OR FINNED COILS.

3.Be sure the chassis is firmly seated in the back of the cabinet.

4.Insert all screws removed during window installation and reattach the front face plate, front panel, and the air filter. Use the REMOVE CHASSIS instructions and figures 1-6 for reference.

THRU-THE-WALL INSTALLATION

NOTE: Consult local building codes prior to installation and/or a qualified carpenter.

Select the Wall Location

This air conditioner has a slide-out chassis, so that it can be installed through an outside wall as specified below:

MAX WALL THICKNESS: 10.5”

IMPORTANT: The side louvers must never be blocked.

NOTE: All parts needed for Thru-The-Wall Installation are provided, except a wood frame, shims, and 10 wood screws (10-1” long minimum). Select a wall surface that:

1.Does not support major structural loads such as the frame construction at ends of windows, and under truss-bearing points, etc.

2.Does not have plumbing or wiring inside.

3.Is near existing electrical outlets, or where another out- let can or will be installed.

4.Does not have objects blocking the air vents which limits cooling.

5.Allows unblocked airflow from the rear and sides of the air conditioner.

Prepare the Wall

1.Prepare the wall in frame construction (including brick and stucco veneer). Working from inside the room, find the wall stud that is nearest the center of the installa- tion area.

2.Cut a hole on each side of the center stud.

3.Measure between the inside edges of every other stud as shown below.

FIG. 1

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents SG-WAC-12HCE Important Safety Instructions Recommended Ground Method Lcdi Power Cord and PlugElectrical Requirements Location Requirements Parts List Tools NeededModel SpecificationsStorm Window Requirements Installation & Assembly InstructionsPrior to Installing the Air Conditioner Window PreparationRemove Chassis Installation & Assembly Instructions Window MountingInstallation & Assembly Instructions Window Mounting Foam Gasket and Top Assembly & InstallationTop Angle Rail and Side Bracket Installation Placing the Cabinet Inside the WindowExtend the Accordion Panels Install the Window Lock and Sash SealPrepare the Wall THRU-THE-WALL InstallationInstalling the Chassis into the Cabinet Select the Wall LocationPrepare and Install the Cabinet Assembly & Installation THRU-THE-WALLSupport Bracket Wooden Strip Masonry ConstructionNormal Operating Sounds Using Your AIR ConditionerElectronic Control Panel & Remote Control Remote ControlUsing Your AIR Conditioner Using Your AIR Conditioner Winter Storage Care and CleaningAir Filter Cleaning Cabinet CleaningTroubleshooting Water collects in the base pan Water is dripping outsideWater is dripping inside the room One Year Limited Warranty Warranty
Related manuals
Manual 20 pages 2.91 Kb

SG-WAC-12HCE specifications

The Soleus Air SG-WAC-12HCE is a powerful and efficient window air conditioning unit designed to provide a comfortable indoor climate even during the hottest summer months. With its sleek design and effective cooling capabilities, this air conditioner has gained popularity among consumers looking for reliability and performance.

One of the standout features of the Soleus Air SG-WAC-12HCE is its 12,000 BTU cooling capacity, making it suitable for medium to large rooms up to 550 square feet. This powerful cooling performance is complemented by a dehumidification mode, which can remove up to 3.5 pints of moisture per hour. This combination ensures that not only is the air cooled down but also makes it less humid, providing a more comfortable living environment.

Energy efficiency is another primary characteristic of the SG-WAC-12HCE. With an Energy Efficiency Ratio (EER) of 12.0, this unit is designed to reduce energy consumption while delivering optimal cooling performance. This feature is essential for those looking to keep energy bills in check while maintaining a pleasant indoor atmosphere. The unit is also ENERGY STAR certified, demonstrating its commitment to minimal environmental impact.

The Soleus Air SG-WAC-12HCE comes equipped with an array of user-friendly controls. It features an intuitive remote control, allowing users to adjust the temperature settings, fan speeds, and modes from the comfort of their couch or bed. The electronic controls include a digital display, making it easier to monitor and set the desired cooling levels accurately.

Additionally, this air conditioner offers three cooling speeds and three fan-only speeds, giving users the flexibility to customize their comfort level based on personal preferences and varying weather conditions. The unit also features a programmable 24-hour timer, which allows for scheduled operation, ensuring the air conditioner only runs when needed.

Installation of the SG-WAC-12HCE is straightforward, thanks to the included window installation kit, which makes it compatible with most standard window sizes. Overall, the Soleus Air SG-WAC-12HCE is a feature-rich window air conditioning unit that excels in cooling efficiency, user convenience, and versatility, making it an exceptional choice for consumers looking to stay cool and comfortable.
Top Page Image Contents