format=r | Specifies that the print data is a FORTRAN carriage control file. |
format=t | Specifies that the print data is a troff Graphic Systems C/A/T phototypesetter file. |
format=v | Specifies that the print data is a Sun raster file. |
order=data,control Specifies that the print data files should be sent before the control file. | |
reserve=none | Specifies that the backend should not reserve a source port. |
| Specifies that the backend should reserve a source port from 721 to 731 as |
reserve=rfc1179
required by RFC 1179.
sanitize_title=no Specifies that the job title string should not be restricted to ASCII characters. sanitize_title=yes Specifies that the job title string should be restricted to ASCII characters. timeout=seconds Specifies the number of seconds to wait for LPD commands to complete.
Common Network Printer URIs
Once you have set the IP address you can access the printer or print server using the ipp, lpd, or socket backends. Table 1 shows a list of common network interfaces and printer servers and the settings you should use with CUPS:
Table 1: Common Device URIs |
|
Model/Manufacturer | Device URI(s) |
Apple LaserWriter | lpd://address/PASSTHRU |
Axis w/o IPP | socket://address:9100 |
Axis OfficeBasic | socket://address:9101 |
(see directions) | socket://address:9102 |
| ipp://address/LPT1 |
Axis w/IPP | ipp://address/LPT2 |
| ipp://address/COM1 |
Castelle LANpressTM | lpd://address/pr1 |
lpd://address/pr2 | |
| lpd://address/pr3 |
| lpd://address/pr1 |
DPI NETPrint | lpd://address/pr2 |
| lpd://address/pr3 |
DLink | socket://address |
EFI® Fiery® RIP | lpd://address/print |
EPSON® Multiprotocol Ethernet Interface Board socket://address
| lpd://address/pr1 | |
Extended System ExtendNET | lpd://address/pr2 | |
| lpd://address/pr3 | |
| socket://address:9100 | |
Hewlett Packard JetDirect | socket://address:9101 | |
| socket://address:9102 | |
| lpd://address/LPT1_PASSTHRU | |
Intel® NetportExpress XL, PRO/100 | lpd://address/LPT2_PASSTHRU | |
| lpd://address/COM1_PASSTHRU | |
LexmarkTM MarkNet | lpd://address/ps | |
Linksys EtherFast® | socket://address:4010 | |
socket://address:4020 | ||
(see directions) | ||
socket://address:4030 | ||
| ||
Linksys PSUS4 | lpd://address/lp |