Electrical Requirements, Nema 6-20P | Soleus Air SG-TTW-14HC

ELECTRICAL REQUIREMENTS

Electrical Shock Hazard

Plug into a grounded 3 prong outlet. Do not remove the ground prong. Do not use an adapter

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock

The electrical ratings for your air conditioner are listed on the model and serial number label located on the front left side of the unit (when facing the front).

Specific electrical requirements are listed in the chart below. Follow the requirements below for the type of plug on the power supply cord.

Power Supply Cord

NEMA 6-20P

Recommended Ground Method

For your personal safety, this air conditioner must be grounded. This air conditioner is equipped with a 3 prong power supply cord with a grounded plug. To minimize the possibility of electrical shock, the cord must be plugged into a 3 prong outlet and grounded in accordance with all local codes and ordinances. If a 3 prong outlet is not available, it is the cus- tomer’s responsibility to have a properly grounded 3 prong outlet installed by a qualified electrician.

It is the customer’s responsibility:

•To contact a qualified electrician

•To assure that the electrical installation is adequate and in conformance with the National Electrical Code, ANSI/NFPA 70 - latest edition, and all local codes and ordinances.

Copies of the standards listed may be obtained from: National Fire Protection Association

One Batterymarch Park

Quincy, Massachusetts 02269

LCDI Power Cord and Plug - NEMA 6-20P

This air conditioner is equipped with an LCDI (Leakage Current Detection and Interruption) power cord and plug as required by US National Electric Code 440.65. This cord consists of a length of shielded flexible cord with no termination on the load side and a LCDI attachment plug on the line side.

The LCDI power cord and plug will remove the supply source via electrical disconnect (circuit trip) if the nominal current leakage between the cord shield and either load conductor exceeds a predetermined value. The cord will remain de- energized until the devise has been manually reset. This is intended to reduce the risk of a fire in the power cord or combustible materials nearby. The cord shields are not grounded and they must be considered a shock hazards if exposed. The cord shield must not be connected to ground or to any exposed metal.

The test and reset buttons on the LCDI Plug are used to check if the plug is functioning properly. To test the plug:

1.Plug power cord into a wall outlet, the power light will turn on.

2.Press the TEST Button, the circuit should trip and cut all power to the air conditioner. The power light will turn off.

3.Press the RESET button for use. The power light will turn back on.

If a test is performed and the indicator light remains ON prior to pressing RESET, current leakage has been detected. Do not use the air conditioner or attempt to reset the LCDI Plug. Con- tact Customer Service for troubleshooting recommendations.

SG-TTW-14HC specifications

The Soleus Air SG-TTW-14HC is a sleek and efficient window-mount air conditioning and heating unit, designed for versatility and optimal temperature control in residential and commercial spaces. With its dual functionality, this model not only cools during the hot summer months but also heats during colder seasons, making it a year-round climate control solution.

One of the main features of the SG-TTW-14HC is its impressive cooling capacity, rated at 14,000 BTU. This robust cooling power allows it to effectively service rooms up to 700 square feet, making it suitable for large living spaces, offices, and workshops. The heating capacity also stands out, providing 11,000 BTU, ensuring that users remain comfortable even in chilly weather.

The unit incorporates innovative technologies aimed at enhancing user experience and efficiency. The programmable thermostat is a notable feature, allowing users to set specific temperatures for different times of the day, which can lead to significant energy savings. This feature is complemented by a 24-hour timer, enabling precise control over the timing of heating or cooling cycles.

Energy efficiency is a key characteristic of the SG-TTW-14HC, with an Energy Efficiency Ratio (EER) of 11.2. This high EER rating translates to lower electricity bills, as the unit operates efficiently. Additionally, it features a dehumidification function that can remove up to 4.5 pints of moisture per hour, helping to maintain a comfortable indoor humidity level.

The design of the Soleus Air SG-TTW-14HC is another highlight, with a sleek, modern exterior that fits seamlessly into any decor. The unit is equipped with a remote control, allowing users to adjust settings from across the room, enhancing convenience. The washable air filter helps maintain air quality and extends the life of the unit, as it captures dust and allergens.

Moreover, the installation process is straightforward, with a window kit included for easy setup. The unit also operates quietly, thanks to its advanced engineering, making it suitable for bedrooms and workspaces alike.

Overall, the Soleus Air SG-TTW-14HC is a powerful, versatile solution for those seeking effective heating and cooling for larger areas, making it an excellent investment for year-round comfort.