HP 9000hns, 9000dn, 9000n manual Remove internal packaging, To remove internal packaging

Note

To remove internal packaging

1Remove all orange packing material from the exterior of the printer and remove any cardboard or styrofoam material that is not orange.

2Remove all orange packing material from the standard output bin and the protective film from the display.

3Open the left-side door and remove the two packing fuser spacers. Orange tape connects fuser spacers to the outside of left door. Remove the orange tape from the fuser shipping locks to the outside of the door. Close the door after removing the fuser spacers and the tape.

4Open the trays, remove any orange packing material, and close the trays.

5Open the front door and remove the orange packing tape at the front transfer roller area and on the lock lever for the print cartridge. Close the door.

Save all packing material. You may need it to repack the printer at a later date.