Step 6. Install Toner Cartridge
1 Remove the toner cartridge from its packaging (save packaging for possible cartridge storage). Open the printer by lifting the top cover.
2 Rotate the cartridge and gently shake it from side to side to distribute the toner evenly inside the cartridge.
3 Locate the sealing tape tab on the end of the cartridge. Carefully bend the tab back and forth until it separates from the cartridge.
4 Firmly pull the tab straight out from the cartridge to remove the entire length of tape (22 in, or 56 cm). Avoid touching any black toner on the tape.
Note
If the tab separates from the tape, grasp the tape and pull it out of the cartridge.
5 Position the cartridge as shown with the arrow pointing into the printer. Slide the cartridge into the printer as far as it will go.
If the cartridge is installed correctly, the cover will close easily.
Note
If toner gets on your clothing, wipe it off with a dry cloth and wash clothing in cold water. (Hot water sets toner into fabric.)
EN | Getting Started Guide 11 |