Soleus Air SG-PAC-08E3 Draining Collected Water, Clamp, Drain Hose Clip, Drain Plug, Screw

DRAINING COLLECTED WATER

When the temperature or humidity is too high, the air conditioner may not be able to evaporate all of the water as quickly as needed. All moisture that is unable to be evaporated is placed in a small bank up water tank in- side the unit. When this tank is completely full, an alarm will sound, the compressor will shut off, and the bucket full icon will light up on the control panel. To manually empty the tank, please follow the instructions below.

Drain Hose Clamp Drain Hose Clip Drain Plug Screw

1)Remove the pre-installed Drain Cap from the unit (See Below).

2)Attach the Clamp with the provided Screw (See Below).

A. Drain Port	A. Drain Port
B. Drain Cap	B. Clamp

3)Attach the Drain Hose to the Drain Port using the Drain Hose Clip. Insert the Drain Plug into the free end of the Drain Hose and guide the Drain Hose through the Clamp. Once finished, the unit can be easily drained by removing the drain plug and guiding the drain hose into a small pan to drain the water.

A. Drain Plug
	D. Drain Hose Clip
B. Drain Port
	E. Clamp
C. Drain Hose

11