HP 1320NW, 1320TN manual HP LaserJet 1320nw printer

Page 6

HP LaserJet 1320nw printer

Power requirements (110)

Power requirements (220)

Power consumption

Minimum recommended circuit capacity for typical product

110-127v (+/-10%), 50/60 Hz (+/-2) 220v-240v (+/-10%), 50/60 Hz (+/-2 Hz)

During printing (22 ppm): 345 watts (average)

During Ready (Standby) and PowerSave*: 6 Watts

*Instant on fuser technology

Off: <1 watts

4.5 amps at 115 volts

2.6 amps at 230 volts

Note

Note

Note

Note

Values are current as of April 1, 2004. Values are subject to change without notice. See http://www.hp.com/support/lj1160/ or http://www.hp.com/support/lj1320/ for current information.

The power reported is the highest value measured for monochrome printing using all standard voltages.

The default time from Ready mode to PowerSave mode and the recovery time from PowerSave mode to the start of printing is negligible (less than 10 seconds) because of the instant on fusing.

The heat dissipation in Ready mode is 20 BTU/hour.

ENWW

Electrical specifications 127

Image 6
Contents Use Printer configurations Hp LaserJet 1160 printerHp LaserJet 1320n printer Understanding print quality settings Electrical specifications HP LaserJet 1160 printerHP LaserJet 1320nw printer Physical specifications Depth 352 mm 13.9 inchesPrinter capacities and ratings PCLMemory specifications
Related manuals
Manual 184 pages 9.84 Kb