HP 3100 Connect the power cord, Connect the supplied phone cord, Press the On button and conﬁgure

Page 3

6 Connect the power cord

Important: Do not connect the USB cable until instructed later in this guide.

Connect one end of the supplied phone cord to the phone port on the left (1-LINE) and the other to a wall jack.

To connect an answering machine or use your own phone cord with the 2-wire adapter, see the User Guide.

aAfter you press the On button, the blue light ﬂashes, and then becomes solid. This may take up to a minute.

b Wait for the ink cartridge prompt before continuing.

HP All-in-One • 3

Image 3

Contents Locate components Remove all tape and lift displayLoad paper trays Attach the control panel faceplate If not attachedConnect the power cord Connect the supplied phone cordPress the On button and conﬁgure Lift latches inside of the device Insert all six ink cartridges Close the access door and follow the promptsInsert the correct CD Turn on your computerConnect the USB cable Congratulations Troubleshooting

Related manuals

Manual 97 pages 23.42 Kb