HP Designget AG5234 Rev. 7 manual Changing the default screening method

USER GUIDE FOR HP 6 COLOR PLUGIN

Note: If the ProofReady profile drop-down list in not available in your page setup, enable color management in your RIP.

ProofReady profile

Device

Paper type (HP Ref)

Resolution (dpi)

HP Photo Gloss 600		DJ5000 Contone	Photo Imaging Gloss	600x600
		42 Sheet	C6964A, C6965A
		DJ5000 Contone
		42 Sheet
		DJ5000 60
		Contone Roll
		DJ5000 60
		Contone Sheet
HP Photo Gloss 600		DJ5000 Contone	Photo Imaging Gloss	600x600
		42 Sheet	C6964A, C6965A
		DJ5000 Contone
		42 Sheet
		DJ5000 6-Col 42
		Roll
		DJ5000 6-Col 42
		Sheet
		DJ5000 Contone
		60 Roll
		DJ5000 Contone
		60 Sheet
		DJ5000 6-Col 60
		Roll
		DJ5000 6-Col 60
		Sheet
	Table 3 HP 6 color ProofReady profiles

7.2 Changing the default screening method

The screening mode used in an output device may be changed if the device supports alternative screens. Refer to Table 1 on page 5 for a list of devices and the screens they support.

To change the screening method used by a device, do the following:

1.In the Harlequin RIP, choose Color > Separations Manager to open the Separations Manager.

2.From the Device list, select the HP Designjet device that you want to configure.

3.From the Style Name list, select the style you want to change, and choose Edit to open the Edit Style dialog, Figure 11.

4.From the Dot shape menu, select the screening method you want to use.

AG50324 Rev. 7 14