CONTROL PANEL FUNCTIONS
ON/OFF BUTTON
Starts or stops the unit.
MODE BUTTON
Press to select the operating mode:
Fan Mode
Air Conditioning Mode
Heating Mode
Dehumidifying Mode
Auto Mode
FAN BUTTON
Press to select the fan speed: High, Medium, and Low.
The fan speed can be visually distinguished by the number of the digital air segments (follow arrow above) flow out from the windmill fan image on the
TEMPERATURE
When in cooling or heating mode, the desired temperature can be selected by pressing the ∧ and ∨ buttons. The
The
TIMER
To set the auto start time, press the Timer on button until the
“
”. Press the ∧ and ∨ buttons to change the clock to the desired time for the unit to automatically start. To set the auto stop time, press the Timer Off button and the
will show a flashing “
”. for the unit to automatically stop. programmed.
Press the ∧ and ∨ buttons to change the clock to the desired time The light will flash for 3 seconds to activate the timer you
TIME DISPLAY
In the diagram above, the letter “J” points to the adjustable time display. To adjust the time, Press FAN, SPEED and SWING together (at the same time), then press UP to adjust the hours, and press DOWN to adjust the minutes.
SWING
To start horizontal oscillation, press the Swing button once. ‘
’ icon will appear on the
OPERATION USING THE CONTROL PANEL
COOLING
1.Properly install the exhaust hoses.
2.Plug the power cord into a grounded outlet.
3.Turn on the unit by pressing the On/Off button on the control panel.
4.Press the Mode button until “
” icon appears on the
5.Press the ∧ or ∨ buttons until the desired temperature appears on the
6.Select the fan speed by pressing the Fan button.
NOTE: During hot days, the unit will cool off the room most efficiently by setting the temperature at
10