5.Locate and open the ‘Extensions’ folder. Drag the spooler file into the Trash. The Spooler file is named according to your printer, and appears as ‘Am_<printer name>’, depending on which printer you installed. From the ‘Printer Descriptions’ folder, located within the ‘Extensions’ folder, drag the PPD files, named according to your output device, into the Trash.
6.Restart your computer.
7.Hold down the Option key while you empty the Trash.
8.The software is now uninstalled.
Windows 95/Windows 98 Installation
1.Insert the Installation CD into your
2.From the CD Setup window, select the language of the installer you would like.
3.Click Next. The Software to Install window displays.
4.Select the language of the software you would like.
5.Click Next. The system displays the License agreement window.
6.After reading the License agreement, click Yes to accept. The Welcome window displays.
7.Click Next. The select Program Folder displays.
8.Select the folder you would like HP DesignJet 500PS to display in.
9.Click Next. The Destination Location window displays.
10.Select the destination by clicking on Browse or except the default location.
11.Click Next.
Note: If you currently have HP DesignJet 500PS on your system the Clear Preferences window displays. Click Yes to delete preference settings on your system. Click not to retain your old preference settings.
12.Click OK to restart your computer.
Setting up the RIP Software
1.Select a printer model.
2.Click Next.
3.Select the port type you would like to use. You may choose LPT or TCIP if you have the HP JetDirect 610 network CARD installed.
If you choose TCPIP you will be asked to enter the IP address of the printer. Find it in the front panel of the machine
4.Click Finished. The system will reboot your computer.
Installing AdobePS Driver
1.After reading the License agreement, click Yes to accept. The AdobePS Postscript printer driver setup window displays.
2.Click Next. The Install Setup Program displays.
3.Click Next. The Install Printer Window displays.
4.Select Local Printer, then click Next.
4