OPERATING THE UNIT USING THE CONTROL PANEL
Air Conditioner Mode
1)Install the exhaust hose and window kit properly (see pages 7 & 8).
2)Plug the Power Cord into an electrical outlet.
3)Turn on the unit by pressing the POWER button on the control panel.
4)Press the Mode button until the “ ” icon appears on the
5)Press the ▲ or ▼ buttons until the desired room temperature appears on the control panel display. The temperature ranges from 61°F - 88 °F (16 °C - 31 °C).
6)Select the desired fan speed by pressing the FAN SPEED button.
NOTE: During hot days, the unit will cool the room most efficiently by setting the temperature at the lowest setting and the fan speed on high. Reducing the length of the exhaust duct, insulating the exhaust hose and window kit, and keeping direct sunlight to a minimum will also improve the cooling efficiency.
NOTE: When the unit is running on cooling mode, the exhaust hoses are required and must be vented outside using the supplied window kit.
Dehumidifier Mode
1)Install the exhaust hoses and window kit properly (see pages 7 & 8).
2)Plug the Power Cord into an electrical outlet.
3)Turn on the unit by pressing the POWER Button on the control panel.
4)Press the MODE button until the “ ” appears on the control panel display.
NOTE: The unit operates at low fan speed during dehumidifier mode. The unit cools room slightly during the dehumidification. Keep the windows and doors closed to aid the effectiveness of the unit in removing the moisture from the room.
NOTE: When the unit is running in dehumidifier mode, the exhaust hoses are required and must be vented outside using the supplied window kit.
NOTE: The unit will not perform in dehumidifier mode when the room temperature is lower than 61°F .
Fan Mode
1)Plug the Power Cord into an electrical outlet.
2)Turn on the unit by pressing the POWER button on the control panel.
3)Press the MODE button until the “ ” icon appears on the control panel display.
4)Select the fan speed by pressing the FAN SPEED button.
5)To circulate more air, press the SWING button on the remote control. The louvers will oscillate in our exclusive WAVEFLO® pattern; back and forth and up and down, spreading more air throughout the room.
NOTE: It is not necessary for the exhaust hoses and window kit to be installed to operate the unit in fan mode.
11