Soleus Air GB-WAC-06ESE-C, GB-WAC-06SE-C Electrical Requirements, Recommended Ground Method

Page 4

ELECTRICAL REQUIREMENTS

Electrical Shock Hazard

Plug into a grounded 3 prong outlet. Do not remove the ground prong. Do not use an adapter

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock

Recommended Ground Method

The electrical ratings for your air conditioner are listed on the model and serial number label located on the front left side of the unit (when facing the front).

Specific electrical requirements are listed in the chart below. Follow the requirements below for the type of plug on the power supply cord.

Wiring Requirements

Power Supply Cord

 

 

•115 volt (103.5 min.—126.5 max)

•0-12 amps

•15-amp time-delay fuse or circuit breaker

•Use on single outlet circuit only

For your personal safety, this air conditioner must be grounded. This air conditioner is equipped with a 3 prong power supply cord with a grounded plug. To minimize the possibility of electrical shock, the cord must be plugged into a 3 prong outlet and grounded in accordance with all local codes and ordinances. If a 3 prong outlet is not available, it is the cus- tomer’s responsibility to have a properly grounded 3 prong outlet installed by a qualified electrician.

It is the customer’s responsibility:

Copies of the standards listed may be obtained from:

• To contact a qualified electrician

National Fire Protection Association

• To assure that the electrical installation is adequate

One Batterymarch Park

Quincy, Massachusetts 02269

and in conformance with the National Electrical Code,

ANSI/NFPA 70 - latest edition, and all local codes and

 

ordinances.

 

 

 

LCDI Power Cord and Plug

 

This air conditioner is equipped with an LCDI (Leakage Current Detection and Interruption) power cord that is required by UL. This power supply cord contains state-of-the-art electronics that sense leakage current. If the cord is damaged and leakage occurs, power will be disconnected from the unit.

The test and reset buttons on the LCDI Plug are used to check if the plug is functioning properly. To test the plug:

1.Plug power cord into a grounded 3 prong outlet

2.Press RESET (on some units a green light will turn on).

3.Press the TEST Button, the circuit should trip and cut all power to the air conditioner (on some units a green light may turn off.

4.Press the RESET button for use. You will hear a click and the A/C is not ready for use.

NOTES:

•The RESET button must be engaged for proper use.

•The power supply cord must be replaced if it fails to trip when the TEST button is pressed and the unit fails to reset.

•Do not use the power supply cord as an ON/OFF switch. The power supply cord is designed as a protection device.

•A damaged power supply cord must be replaced with a new power supply cord from Soleus Air Powered by Gree.

•The power supply cord contains new user serviceable parts. Opening the tamper-resistant case voids all warranty and per- formance claims.

NOTE: Your units power cord and plug may differ from the one shown.

3

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Models GB-WAC-06SE-C GB-WAC-06ESE-C GB-WAC-08ESE-C Page Important Safety Instructions Electrical Requirements Recommended Ground MethodPacking List Packing ListSpecifications GB -WAC-06SE-C GB -WAC-06ESE-C GB -WAC-08ESE-CInstallation & Assembly Instructions TOP Rail Installation Accordion Panel Installation Assembly & InstallationPlacing the Unit Inside a Normal Window If AC is Blocked by a Storm Window Removing the Air Conditioner from the WindowElectronic Control Panel & Remote Control Using Your AIR ConditionerAir Conditioner Controls Normal Operating Sounds Remote Control Operating Your AIR ConditionerOperating Your AIR Conditioner Using Your AIR Conditioner Care and Cleaning Air Filter CleaningCabinet Cleaning Winter StorageTroubleshooting Problem Possible Causes SolutionsWater is dripping outside Warranty Page 66129908031

GB-WAC-08ESE-C, GB-WAC-06ESE-C, GB-WAC-06SE-C specifications

The Soleus Air GB-WAC-06SE-C, GB-WAC-08ESE-C, and GB-WAC-06ESE-C are powerful window air conditioning units designed to provide efficient cooling solutions for various indoor spaces. Each model combines innovative technology with user-friendly features, making them suitable for homes, offices, or any residential applications.

The Soleus Air GB-WAC-06SE-C is perfect for smaller rooms. With a cooling capacity of 6,000 BTU, this unit effectively cools spaces up to 250 square feet. It boasts a cooling and dehumidification function, making it ideal for humid summers. The sleek design and lightweight construction facilitate easy installation and seamless integration into any window. The unit also features electronic controls, allowing users to conveniently adjust settings and temperatures.

Moving on to the GB-WAC-08ESE-C, this model has an increased cooling capacity of 8,000 BTU, making it suitable for medium-sized rooms of up to 350 square feet. This unit is equipped with a three-speed fan and a programmable timer, providing flexibility in adjusting airflow and temperature to suit individual preferences. Its energy-efficient design is highlighted by a high Energy Efficiency Ratio (EER), helping users save on energy bills while enjoying optimum comfort.

The GB-WAC-06ESE-C model offers a balanced solution, cooling spaces up to 250 square feet with a capacity of 6,000 BTU, similar to the GB-WAC-06SE-C. However, it emphasizes enhanced energy savings and features an eco-friendly refrigerant, which minimizes its environmental footprint. This model also includes a remote control, making it convenient for users to operate the AC from the comfort of their seat.

All three units come equipped with multiple cooling and fan speeds, allowing users to customize their comfort level. Maintenance is also simplified, as these models feature easy-to-clean air filters that significantly improve indoor air quality. Additionally, the built-in dehumidification function extracts excess moisture from the air, further enhancing comfort during hot and humid days.

Overall, the Soleus Air GB-WAC-06SE-C, GB-WAC-08ESE-C, and GB-WAC-06ESE-C models demonstrate a commitment to quality, efficiency, and user comfort, delivering reliable cooling solutions for a variety of spaces. Equipped with state-of-the-art features and designed for easy operation and maintenance, these units are an excellent addition to any home or office needing effective climate control.
Top Page Image Contents