Soleus Air GH-PAC-12E1HP WITH HEAT Ating Instructions, Remote Control Oper, Blow, Sleep Button

REMOTE CONTROL OPER ATING INSTRUCTIONS

REMOTE CONTROL

Blow

Blow

Press the blow button to enable the blow function. When enable, blow will force the fan to remain on once the unit is powered down. The fan stays on to dry out any remaining moisture in the unit to help minimize mold or bacteria growth. This function only works under cooling mode.

SLEEP

BLOW

SLEEP BUTTON

LOCK LOCK FUNCTION

•Press “+” and “-” buttons together at the same time to lock the remote keyboard. Do this again to unlock.

LIGHT

Press the SLEEP mode button to engage SLEEP mode.. This feature limits compressor usage and enhances energy savings by adjusting the set temperature while you aresleeping. Press the SLEEP button once more to disable Sleep Mode. Sleep Mode is not available in Auto or Fan Modes.

In Cooling or Dehumi (DRY) modes: When sleep mode is selected the set temperature will automatically increase 2°F after 1 hour. After 2 hours, the set tempera- ture will increase another 2°F for a total increase of 4°F.

In Heating mode (GH-PAC-12E1HP only): When sleep modeis selected the set temperature will automatically increase 2°F after 1 hour. After 2 hours, the set tem- perature will decrease another°2F for a total decreaseof 4°F.

LIGHT BUTTON

Press the LIGHT button to turn the on the display Light. A small Light bulb icon will light up on the remote con- trol display.

AUTO AUTO MODE

•Press the MODE button to select Auto Mode. Once Auto Mode is selected the unit will automatically choose the operating modbeased on the current room temperature. The temperatuerwill not be displayed on the LED in this mode.

TEMP
MEASURE	CHANGE BETWEEN F° and C°

•When the unit is o , press the MODE and “-” button to change between F° and C°.

12