Dimm Installation Guide

3.Open the toner compartment door, depress the interlock button on top of the printer (Figure 4), and then slide the printer panel forward about ½ of an inch. Pull panel away from printer (Figure 5).

Figure 4

Figure 5

CAUTION: The DIMM is a static-sensitive device and can be permanently damaged if handled improperly. Handle the DIMM by the edges only. Avoid touching any of the components on the DIMM or the metal contacts along the edge of the DIMM. Before removing the DIMM from the anti-static-bag, ground yourself by touching the metal portion of the printer chassis to dissipate any static charge.

4.Ensure the DIMM is positioned correctly (Figure 6), and then fully insert the DIMM into the DIMM socket until the DIMM snaps into place (retaining clips should be closed).

The DIMM is keyed and can only be inserted when the two notches are aligned with the tabs in the DIMM slot.

Place DIMM into the DIMM slot, then push firmly at each corner until the DIMM snaps into place.

Figure 6

5.Replace the printer panels, and then reconnect the printer power cable to the AC wall receptacle.

NOTE: If assistance is required for removing or installing the DIMM, please call Altec Technical Support at (800) 997-9921 x 1248.

Page 7 of 16