HP ProLiant servers that support redundant power supplies only allow installation of
Table 4: HP CS power supply compatibility with HP PDS
Condition | System insight | Description | |
display indication | |||
|
| ||
|
|
| |
Power supply | Power supply LED (all |
| |
mismatch detected | supplies) blinking | BIOS ROM will power up power supply #1 and then halt. | |
during boot | amber |
| |
|
|
| |
Power supply | Power supply LED | iLO will detect the mismatch and not allow the added power supply to turn | |
mismatch detected | (added supply only) | ||
on. | |||
during runtime | blinking amber | ||
| |||
|
|
| |
Unsupported power | Power supply LED | BIOS ROM will detect an unsupported power supply installation. BIOS ROM | |
supply detected | (added supply only) | will halt at POST with a failure message and will light the appropriate LED. | |
during boot | blinking amber | The LED will reset when the unsupported supply has been removed and | |
|
| system is restarted. | |
|
|
|
HP CS power supplies are
•The server must already be configured with redundant power supplies.
•The removed and replacement power supplies must be of the same type (same part number).
For all other situations, the ProLiant server should be powered down before a power supply is removed or installed.
Conclusion
The common slot power supply bay allows over 90% of the ProLiant server line to use 80
For more information
Visit the URLs listed below if you need additional information.
Resource description | Web address |
|
|
HP Power Supplies | http://h18004.www1.hp.com/products/servers/rackandpower/pow |
| ersupplies/index.html |
HP ProLiant servers | www.hp.com/go/proliant |
|
|
HP ProLiant Energy Efficient Solutions | |
| 121.html |
Automated Energy Optimization | |
|
|
HP Power Advisor utility | www.hp.com/go/hppoweradvisor |
|
|
80 PLUS program | www.80plus.org |
|
|
HP interactive online compatibility guide | www.hpproliantoptions.com/index.aspx |
|
|
HP Intelligent Power Discovery (Power Discovery | www.hp.com/go/ipd |
Services) |
|
|
|
11