7.Remove the black screw on the front of the chassis behind the bezel. The screw is located next to the optical drive and is labeled "BEZEL."
Figure 2-35Retrieving the Front Bezel Security Screw
8.Replace the front bezel.
9.Install the security screw through the middle front bezel release tab and into the chassis to secure the front bezel in place.
Figure 2-36Installing the Front Bezel Security Screw
10.Replace the access panel.
11.If the computer was on a stand, replace the stand.
12.Reconnect the power cord and turn on the computer.
13.Lock any security devices that were disengaged when the access panel was removed.
36 Chapter 2 Hardware Upgrades
