HP MP9 Model 9000 Base Model manual Computer operating guidelines and routine care

Page 29

BComputer operating guidelines, routine care and

shipping preparation

Computer operating guidelines and routine care

Follow these guidelines to properly set up and care for the computer and monitor:

Keep the computer away from excessive moisture, direct sunlight, and extremes of heat and cold.

Operate the computer on a sturdy, level surface. Leave a 10.2-cm (4-inch) clearance on all vented sides of the computer and above the monitor to permit the required airflow.

Never restrict the airflow into the computer by blocking any vents or air intakes. Do not place the keyboard, with the keyboard feet down, directly against the front of the desktop unit as this also restricts airflow.

Never operate the computer with the access panel or any of the expansion card slot covers removed.

Do not stack computers on top of each other or place computers so near each other that they are subject to each other’s re-circulated or preheated air.

If the computer is to be operated within a separate enclosure, intake and exhaust ventilation must be provided on the enclosure, and the same operating guidelines listed above will still apply.

Keep liquids away from the computer and keyboard.

Never cover the ventilation slots on the monitor with any type of material.

Install or enable power management functions of the operating system or other software, including sleep states.

Turn off the computer before you do either of the following:

Wipe the exterior of the computer with a soft, damp cloth as needed. Using cleaning products may discolor or damage the finish.

Occasionally clean the air vents on all vented sides of the computer. Lint, dust, and other foreign matter can block the vents and limit the airflow.

Computer operating guidelines and routine care

23

Image 29
Contents Hardware Reference Guide Product Notice About This Book Iv About This Book Table of contents Page Standard configuration features Product featuresFront panel components MP9 Digital Signage Player Serial number location Rear panel components MP9 Digital Signage PlayerServiceability features Hardware upgradesConnecting the power cord Removing the computer access panel Changing from desktop to tower configuration Replacing the computer access panelPage Removing and replacing a hard drive Page Page SODIMMs Installing additional memoryPopulating Sodimm sockets Installing SODIMMs Page Page Replacing the battery Type Type Page Installing a security lock Grounding methods Electrostatic dischargePreventing electrostatic damage Computer operating guidelines and routine care Shipping preparation Memory Index