HP xw8000 Intel Pro 1000 MT NIC DC193A Dimensions, Connector, Data rates supported, Compliance

QuickSpecs

HP Workstation xw8000

Technical Specifications

Intel Pro 1000 MT NIC DC193A	Dimensions	6.4 x 4.8 x 0.8 inches (16.3 x 12.1 x 1.9 cm)
	Connector	RJ-45
	Controller	Intel 82540EM Gigabit Controller
	Memory	Integrated 96 Kb frame buffer memory
	Data rates supported	10/100/1000 Mbps
	Compliance	IEEE 802.1A, 802.1P, 802.1P, 802.1Q, 802.2, 802.3, 802.3AB and 802.3u
		compliant, 802.3x flow control
	Bus architecture	PCI 2.2
	Data path width	32-bit, 33/66 MHz bus interface
	Data transfer mode	Bus-master DMA
	Hardware certifications	FCC, B, CE, TUV- cTUVus Mark Canada and United States, TUV- GS Mark for
		European Union
	Power requirement	1.48 watts @ +3.3V AUX supply with 5V tolerance
	Boot ROM support	Yes
	Network transfer rate	10BASE-T (half-duplex) 10 Mbps
		10BASE-T (full-duplex) 20 Mbps
		100BASE-TX (half-duplex) 100 Mbps
		100BASE-TX (full-duplex) 200 Mbps
		1000BASE-T, 1000 Mbps
	Environmental	Operating temperature	32° to 131°F (0° to 55° C)
		Operating humidity	85% at 131° F (55° C)
	Environmental	Operating temperature	32° to 131°F (0° to 55° C)
	Management capabilities	ACPI, WOL and DMI 2.0, PXE 2.0, WfM 2.0, Intel PROset II utility
	Kit contents	The Intel Pro 1000 MT NIC, CD containing Intel PROset II NIC drivers, quick
		install guide, product warranty statement

DA-11506 North America — Version 11 — June 2, 2003 38