HP xw4200 manual HP 48X CD-RW

QuickSpecs

HP Workstation xw4200

Technical Specifications - Optical Devices

HP 48X CD-RW	Height	5.25-inch, half-height, tray-load
	Mounting Orientation	Horizontal or vertical
	Interface	ATAPI/EIDE
	Dimensions (HxWxD)	1.63 x 5.75 x 7.27 [max] in (4.13 x 14.6 x 18.5 [max] cm) (external, excluding bezel)
	Weight (max)	2.0 lb (0.9 kg)
	Read Only Disc	Data Transfer Rates –	Digital audio extraction (minimum) – 1,800 KB/s (12X)
	Parameters	Read	CD read – up to 7,200 KB/s (48X)
		Media and Formats – Read Formats: CD-DA, CD-ROM (Mode 1 and 2), CD-ROM
			XA (Mode 2, Form 1 and 2), Mixed Mode, CD-Plus, CD-
			Extra, CD-I FMV, Video CD, CD-Text, Photo CD (single
			and multisession)
			Media: stamped, CD-R, CD-RW
	Writeable Disc Parameters Data Transfer Rates –		CD-R write – 2100 KB/s (14X) to 7200 KB/s (40X)
		Write	CD-RW write – 600 KB/s (4X)
			CD-RW write (high speed) – 1500 KB/s (10X) to 1800
			KB/s (12X)
			CD-RW write (ultra high speed) – 2400 KB/s (16X) to
			4800 KB/s (32X)
		Media and Formats – Write Formats: CD-DA, CD-ROM (Mode 1 and 2), CD-ROM
			XA (Mode 2, Form 1 and 2), Mixed Mode, CD-Plus, CD-
			Extra, CD-I FMV, Video CD, CD-Text
			Media: CD-R, CD-RW (including ultra-speed)
		Write Methods	Disc-at-once, session-at-once,, track-at-once,
			incremental fixed and variable packet, multisession
	Access Times	CD-ROM Mode 1	125 ms
	(typical reads, including	Full Stroke CD	210 ms (seek)
	settling)
		Start-up Time (typical)	<7 s (single session), <30 s (multisession)
		Stop Time (typical)	<4 s
		Write Buffer Size	2 MB
		Data Transfer Modes	PIO Mode 4 (16.6 MB/s); Multi-word DMA mode 2 (16.6
			MB/s); UltraDMA Mode 2 (33.3 MB/s)
	Power	Source	Four-pin, DC power receptacle
		DC Power Requirement	5 VDC ± 5%-100 mV ripple p-p
			12 VDC ± 5%-200 mV ripple p-p
		DC Current	5 VDC (< 1000 mA typical, < 1600 mA maximum)
			12 VDC (< 600 mA typical, < 1400 mA maximum)
		Total Drive Power	< 2.5 Watt
		(standby mode)
	Audio Output	Line-Out	0.7 VRMS
		Signal-to-Noise Ratio	74 dB
		Channel Separation	65 dB
	Configuration Jumper	Master, slave, and cable select modes
	Block
	Operating Conditions	Temperature	41° to 122° F (5° to 50° C)
		Humidity	10% to 90%10% to 90%

DA - 12022 Worldwide — Version 6 — September 1, 2004 Page 38