HP DV3 manual Keyboard and switch cover

Keyboard and switch cover

NOTE: The keyboard and switch cover must be removed simultaneously.

Description	Spare part number	Description	Spare part number
Keyboard (The United States)	507091-001	Backlit keyboard (The United	507092-001
		States)
Keyboard (Canada)	507091-121	Switch cover	506240-001

Before removing the keyboard and switch cover, follow these steps:

1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the computer.

3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4.Remove the battery (see Battery on page 32).

5.Remove the hard drive (see Hard drive on page 38).

Remove the keyboard and switch cover:

1.Remove the three Phillips PM2.5×7.0 screws (1) that secure the keyboard to the computer.

2.Remove the nine Phillips screws (2) that secure the switch cover to the computer.

3.Turn the computer right-side up, with the front toward you.

4.Open the computer as far as possible.

40 Chapter 4 Removal and replacement procedures