QuickSpecs
HP t510 Flexible Thin Client Series
Technical Specifications – Environmental Data
| 115 VAC (60Hz) | 230 VAC (50Hz) | 100 VAC (60Hz) |
Idle State: | 33.44 BTU/hr | 33.44 BTU/hr | 33.23 BTU/hr |
Off Mode: | 1.50 BTU/hr | 1.54 BTU/hr | 1.54 BTU/hr |
NOTE: Heat dissipation is calculated based on the measured watts, assuming the service level is attained for one hour
BATTERIES
This product complies with ISO standards:
EU Directive 91/ 157/ EEC
EU Directive 93/ 86/ EEC
EU Directive 98/ 101/ EEC
Batteries used in the product do not contain:
Mercury greater the 5ppm by weight
Cadmium greater than 10ppm by weight
Lead greater than 4000ppm by weight.
Battery size: CR2032 (coin cell)
Battery type: Lithium
RECYCLED MATERIAL
Product | This product containsat least 10% recycled materials (by weight). |
| This product isat least 90% (by weight) recyclable when disposed of properly |
| at end of life. |
Packaging | The EPE foam packaging material contains at least 5% (by weight) post- |
| consumer recycled content. |
| The corrugated paper packaging materials contains at least 80% (by weight) |
| |
| The packaging for this product is 100% (by weight) recyclable when disposed |
| of properly. |
RoHS COMPLIANCE
MATERIAL USAGE
This product does not contain any of the following substances in excess of regulatory limits (refer to the HP General Specification for the Environment at: http://www.hp.com/hpinfo/globalcitizenship/environment/ supplychain/gen_specifications.html):
Asbestos
Certain Azo Colorants
Certain Brominated Flame Retardants - may not be used as flame retardants in plastics
DA - 14256 Worldwide — Version 18 — November 6, 2013 | Page 13 |