QuickSpecs
hp iPAQ Pocket PC h5400 Series
Standard Features
WLAN Specifications* Radio Specifications
RF Network Standard | IEEE 802 Part 11b (802.11b) |
|
Frequency Band | 2,4000 to 2.4835 GHz |
|
| 2,4465 to 2.4835 GHz (France) |
|
| 2,4000 to 2,4697 GHz (Japan) |
|
Number of Selectable Sub- | United States (FCC) | 11 |
channels | France (FR) | 4 |
| Japan (JP) | 14 |
| Other countries (ETSI) | 13 |
Data Rates | 1, 2, 5.5, 11 Mbps |
|
Antenna type | High performance ½ wavelength stub, connected via micro strip touch pad | |
WEP Security | 64 bit encryption keys compliant to IEEE 802.11 | |
| 128 bit encryption key compliant to IEEE 802.11 | |
Network Architecture Models |
| |
| Infrastructure (Access Points Required) | |
Modulation Technique | Direct Sequence Spread Spectrum | |
Modulation Schemes | DBPSK, DQPSK, CCK |
|
Receiver Sensitivity – Bit Error | 11 Mbps: |
|
Rate | 5.5 Mbps: |
|
| 2 Mbps: |
|
| 1 Mbps: |
|
Maximum Receive Level | - 4 dBm (1/2 Mbits) |
|
|
| |
Output Power (approximately) | 17 dBm |
|
Power Management | Radio On/Off control through Wireless Control or iPAQ WLAN application | |
Power Consumption | Transfer mode: < 500 mA, maximum | |
| Receive mode: < 260 mA, maximum | |
| Standby mode: < 20 mA, nominal | |
Power Saving Option | 802.11 Compliant Power Saving, 50 mA | |
| Power Saving Mode selectable through the configuration utility | |
| ACPI compliant power management | |
Media Access Protocol | CSMA/CA (Collision Avoidance) with ACK | |
Protocols Supported | TCP/IP |
|
| IPX/SPX |
|
| UDP |
|
Throughput | Data Rate | Operating Distance |
> 4.5 Mbps | 11 Mbps | • 1000 feet – Open sight |
|
| • 100 feet – Closed space (Steel Space) |
> 2 Mbps | 5.5 Mbps | • 1100 feet – Open sight |
|
| • 200 feet – Closed space (Steel Space) |
> 700 Kbps | 1 Mbps | • 1200 feet – Open sight |
|
| • 300 feet – Closed space (Steel Space) |
|
| |
Certifications | All necessary regulatory approvals for countries we support including: | |
| WECA |
|
| FCC (47 CFR) Part 15C, Section 15.247&15.249 | |
| ETS 300 328, ETS 300 826 |
|
| Low Voltage Directive IEC950 |
|
| UL, CSA, and CE Mark |
|
North America — Version 3 — January 7, 2003 | 4 |