PowerMaster Plus
Series Strip Nailer
Step No. 1 – Grasp the nailer handle firmly. Pull the magazine follower all the way to the rear of the magazine until it is latched into its loading position by the magazine latch.
Step No. 2 – Insert the a strip of fasteners into the top of the magazine with the point of the nails facing the nose area.
Step No. 3 – Hold the follower firmly and press the follower latch. Slide the follower forward until it contacts the nails. The tool is now ready for use.
NOTE: 5000S models have a follower release button.
T250-F16 Series Finish Nailer
Step No. 1 – Grasp the nailer firmly with one hand.
Step No. 2 – Insert the strip with the point of the fastener facing down towards the bottom of the magazine.
Step No. 3 – Hold the follower firmly and press the follower latch. Slide the follower forward until it contacts the nails. The tool is now ready for use.
10