HP Networking Safety and Compliance manual Power distribution units PDUs

Page 9

For rack installations, do not exceed the maximum number of UPS products in any single equipment rack.

For rack installations, install the UPS only at the bottom of a rack.

To reduce the risk of personal injury or damage to equipment when installing a Remote Emergency Power Off (REPO) port:

The REPO port must be wired by a licensed electrician.

Verify that the main AC power disconnect device for the UPS is locked and/or tagged in the OFF position before wiring the REPO port.

In North America, the REPO circuit must comply with the NEC (NFPA 70, Article 725) for a Class 2 circuit. In other geographical regions or countries, the REPO port wiring must comply with the national and local standards in the area in which the product is installed.

To reduce the risk of personal injury from electric shock or damage to equipment when installing or servicing batteries:

Make sure that only trained service personnel handle or connect the batteries.

Remove watches, rings, or other metal objects prior to working with the equipment.

Use tools with insulated handles.

On products with remote external batteries, do not attempt to replace batteries unless all battery circuit breakers are in the OFF (down) position. These are hazardous voltage batteries.

This product may contain sealed lead-acid batteries. To reduce the risk of fire or chemical burns:

Do not attempt to recharge batteries after they have been removed from the equipment.

Do not disassemble, crush, or puncture the batteries.

Do not short the external contacts of the batteries.

Do not immerse the batteries in water.

Do not expose the batteries to temperatures higher than 60°C or dispose of in fire.

Use only the HP spare battery designated for this equipment.

Power distribution units (PDUs)

To reduce the risk of electric shock and/or equipment damage when installing or servicing PDUs:

The installation and routine maintenance and service of PDUs must be performed by trained service technicians who are knowledgeable about the procedures, precautions, and hazards associated with AC power products.

Hardwired PDUs require a direct connection to an AC branch circuit (AC mains). Connection should only be performed in accordance with National Electrical Code (NFPA70 Article 310) in North America, or in other regions or countries, in accordance with the equivalent local and national wiring regulations.

A reliable grounded (earthed) connection should be checked before connecting PDUs.

Use a Lockout/Tagout procedure to isolate hardwired PDUs from AC power before servicing or replacing the product.

Precautions for power products

9

Image 9
Contents Abstract Page Contents Index Safety precautions General precautionsSymbols on equipment Precautions for maintaining and servicing products Power cords Precautions for power productsUninterruptible power supply UPS products Power suppliesPower distribution units PDUs Earth leakage current GroundingPrecautions for products installed in racks and cabinets Cabinet safety Precautions for modems, telecommunications, or LAN optionsWaste Electrical and Electronic Equipment Weee statements Environmental noticesBattery replacement notices Battery replacement notices Environmental notices Perchlorate material Special handling may apply RoHS material content declarationsEuropean Union Commission Regulation 1275/2008 Regulatory compliance identification numbers Regulatory compliance noticesFederal Communications Commission notice FCC rating labelCables ModificationClass a equipment Class B equipmentProducts with wireless functionality EMF Trusted Platform Module TPM China Import RestrictionsEuropean Union Regulatory Notice Regulatory compliance notices Belarus Kazakhstan Russia marking Bsmi noticesManufacturer and Local Representative Information Brazilian notice Wireless devicesCanadian notice Japanese noticeLaser compliance notices Mexican noticeTaiwanese notice Regulatory compliance notices Laser compliance notices Index Telecommunications equipment safety precautions