HP TX2-1375DX, tx2-1310au, tx2-1308au Front components, Panel System and Security Power Options

Front components

Component		Description
(1)	Display release latch	Opens the computer.
(2)	Power switch*	● When the computer is off, slide the power switch to the right
		to turn on the computer.
		● When the computer is on, slide the power switch to the right
		to initiate Sleep.
		● When the computer is in the Sleep state, briefly slide the
		power switch to the right to exit Sleep.
		● When the computer is in Hibernation, briefly slide the power
		switch to the right to exit Hibernation.
		If the computer has stopped responding and Windows shutdown
		procedures are ineffective, slide the power switch to the right and
		hold for at least 5 seconds to turn off the computer.
		To learn more about your power settings, select Start > Control
		Panel > System and Security > Power Options.
(3)	Power light	● On: The computer is on.
		● Blinking: The computer is in the Sleep state.
		● Off: The computer is off or in Hibernation.
(4)	Consumer infrared lens	Receives a signal from the HP Remote Control.
(5)	Audio-out (headphone) S/PDIF jack	Provides enhanced audio performance, including surround sound
		and other high-end audio output.
(6)	Audio-out (headphone) jack	Produce sound when connected to optional powered stereo
		speakers, headphones, ear buds, a headset, or television audio.
(7)	Audio-in (microphone) jack	Connects an optional computer headset microphone, stereo array
		microphone, or monaural microphone.
(8)	Wireless switch	Turns the wireless feature on or off, but does not establish a
		wireless connection.

NOTE: A wireless network must be set up in order to establish a wireless connection.

4 Chapter 2 Components