![](/images/new-backgrounds/1270610/27061053x1.webp)
Reverse this procedure to install the keyboard/top cover.
TouchPad
Component | Spare part number |
|
|
TouchPad (includes cable) | |
|
|
Before replacing the TouchPad, follow these steps:
1.Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect the power from the computer by unplugging the power cord from the computer.
3.Disconnect all external devices from the computer.
4.Remove the keyboard/top cover (see Keyboard/top cover on page 17).
Remove the TouchPad:
1.Turn the keyboard/top cover upside down with the front toward you.
2.Remove the two Phillips PM1.9×2.1 broad head screws (1) that secure the TouchPad to the keyboard/top cover.
3.Press on the tab (2) on the back of the TouchPad to release the ToucPad from the keyboard/ top cover.
NOTE: When releasing the TouchPad, make sure the TouchPad cable routes through the opening (3) in the keyboard/top cover.
TouchPad 21