e.Remove the display/webcam cable (4).
5.To remove the display panel from the bezel:
NOTE: The display panel and bezel are available using spare part number
a.Position the display bezel/display panel assembly
b.If necessary, disconnect the display/webcam cable from the connector at the bottom of the display panel (1).
c.Remove the four Phillips PM2.0×3.0 screws (2) that secure the display panel to the display enclosure.
d.Remove the display panel from the bezel (3).
6.The display hinges are located in the display enclosure. To remove the display hinges:
NOTE: The display hinges are available using spare part number
56 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts