HP X1020EA Using Commands on the Notebook, Identifying Your Modem, Accessing Your Command Set

Modem Command Guidelines

Identifying Your Modem

To display the model name of the modem in your notebook:

1.Select Start.

2.Right-click My Computer > Properties > Hardware tab > Device Manager button.

3.Double-click Modems. (An icon and name for your modem is displayed.)

4.Double-click the modem name icon. (The modem model name is displayed.)

Accessing Your Command Set

After you identify the model name of your notebook, refer to the modem manufacturer’s Web site to obtain an updated command set.

Using Commands on the Notebook

Entering a Command

When entering modem commands on the notebook:

■You must start every AT command line (except the A/ and

+++ commands) with the attention (AT) code characters. If you do not begin the command line with the attention (AT) code characters, the modem will not execute the command.

■You must type the AT prefix in the same case (AT or at, not At or aT).

■You may type commands following the AT prefix in all uppercase, all lowercase, or any combination of uppercase and lowercase letters.

■You may enter telephone numbers with or without punctuation, for example, (123) 456-7890 or 1234567890.

2 Modem Command Guidelines