Sterling 882.00291.00 Functional Description, Models Covered in This Manual, General Description

Page 10

Chapter 2: Functional Description

2-1 Models Covered in This Manual

This manual provides operation, installation, and maintenance instructions for 15, 30 and 60 cfm dehumidifying dryers. Model numbers are listed on the serial tag. Make sure you know the model and serial number of your equipment before contacting the manufacturer for parts or service.

Our dehumidifying mini dryers are designed to generate heated dehumidified air (at a very low dew point) at carefully controlled temperatures for use in plastic drying systems. The dryer circulates hot air through a column of plastic resin in the large drying hopper. The resin in the hopper is discharged through a slide gate in a “first in, first out” manner.

2-2 General Description

The Drying System

Dehumidifying dryers are used to generate very low dew point air heated to a controlled temperature for drying plastic pellets and regrind.

Our dryers force hot, dry air through resin in a drying hopper, where air picks up moisture from the material and draws it back to the dryer. In the dryer, a desiccant bed strips moisture from the air. The dried process air is then re-heated and delivered back into the drying hopper for more moisture removal.

Portion of the low dew point process air is directed to the desiccant tank that is off process. This air is heated to approximately 450°F (232°C) before entering the bed that is in regeneration. The moisture is then forced from the desiccant before being exhausted into the atmosphere. A small amount of ambient air is introduced into the process return air filter to make up for the air lost during the bed regeneration. To compensate for the humidity content in the air, this dryer is supplied with the proper amount of desiccant.

What is desiccant?

Desiccant is a material that attracts and holds (absorbs) water from the air. The desiccant our dryers use is a synthetic crystalline metal aluminosilicate blended with a clay binder and formed into beads.

The Process/Regeneration Cycle

Our dryers have two desiccant beds. While one bed is on-line in the process air loop, the other is off-line, being regenerated.

When a desiccant bed is on-line, it absorbs moisture from the process air. In time, the bed becomes saturated with moisture and needs to be regenerated. The dryer automatically redirects the process airflow to the second bed, and starts the regeneration cycle on the first bed.

During regeneration, the dryer system heats the very low dew point air and forces it through the desiccant bed. The moisture driven off the bed bleeds to the atmosphere.

15, 30, & 60 cfm Compact Dryers

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents SDA Series 15, 30, & 60 cfm Compact Dehumidifying Dryers Event of Shipping Damage Shipping InformationUnpacking and Inspection If the Shipment is Not CompleteTable of Contents Maintenance How to Use This Manual SafetySafety Symbols Used in this Manual Safety Tag Information Wear Safety Glasses and Work GlovesGeneral Responsibility ResponsibilityOperator Responsibility Remember Maintenance Responsibility Reporting a Safety DefectModels Covered in This Manual Functional DescriptionGeneral Description Mechanical Features Standard FeaturesElectrical Features Controller Features Safety Devices and InterlocksOptions Safety Device Lock-Outs Safety Circuit StandardsFail Safe Operation Uncrating the Equipment InstallationRigging and Placing the Dryer Suggested Lift Rigging for Cart Mount Dryers Electrical Connections Suggested Lift Rigging for Machine Mounted DryersSetup Procedures Checking for Proper Blower Rotation Three-Phase ModelsDrying Hopper Air Trap Considerations Installing Water LinesInitial Start-up Optional AftercoolerAuto-Tuning the Dryer Shutting Down the DryerOperation SwitchesIndicator Lights Controller Description and OperationProcess Air Temperature Controller Indicator Name Description Lit when Control Output 1 is on. The Out1Lit when Control Output 2 is on. Not used Lights in the Operation Indicator Section whenAdjustment Level Indicator Name Description Setting the Process Air TemperatureE5CN Operating Parameters Entering Operating Parameters to Select Modes Process Air Dew Point Display Setting the High Dew Point AlarmOptional Dryer Operation Procedures Controller OperationAlarm Display Messages High Temp Valve MTR Maintenance Preventative Maintenance ScheduleServicing Process Air Filters Preventative MaintenanceRecommendations for Cleaning and Replacing Filters VacuumingSymptoms of Worn Desiccant Corrective MaintenanceCleaning with Compressed Air Servicing the Dew Point Monitor+ First AID + Replacing Worn DesiccantDesiccant Bed Location and Disassembly Procedures Replacing the Process/Regeneration HeaterReplacing/Cleaning the Cooling Coil Replacement ProceduresPage Troubleshooting IntroductionProc Blwr Determining Temperature Controller Errors or Sensor Errors Using a ThermocoupleTechnical Specifications AppendixDrawings and Diagrams Aftercooler Design SpecificationsHigh Heat Model 180F to 400F Air Flow Schematic Spare Parts List Level 1 Spare Parts List Electrical & MechanicalHI-CORE Desiccant Dryer 15/30/60 CFM Units 30 CFM 60 CFM 120V Control Common Parts 220V Control Common Parts Returned Material Policy Dryer Identification Serial Number TagParts and Service Department Parts Department Service DepartmentTechnical Assistance Sales Department
Related manuals
Manual 52 pages 3.6 Kb Manual 50 pages 20.38 Kb

882.00291.00 specifications

Sterling 882.00291.00 is a remarkable piece of technology designed to cater to the rigorous demands of modern users who require both utility and aesthetics in their devices. This innovative product is a testament to Sterling's commitment to quality and functionality, combining advanced features with user-friendly designs to enhance the overall experience.

At the heart of the Sterling 882.00291.00 is its robust performance, powered by a cutting-edge processor that ensures swift and efficient operation. Users will appreciate the seamless multitasking capabilities, allowing them to run multiple applications without any lag. The processor is complemented by ample RAM, providing a smooth experience whether you are gaming, streaming, or handling productivity tasks.

One of the standout features of the Sterling 882.00291.00 is its high-resolution display. With vibrant colors and excellent clarity, the screen enhances visual experiences, making it ideal for both entertainment and professional use. Whether watching movies, browsing photos, or working on a presentation, the display stands out in terms of brightness and color accuracy, making every detail pop.

Connectivity is another strong suit of this model. Equipped with multiple ports, including USB-C, HDMI, and traditional USB connectors, the Sterling 882.00291.00 ensures users can connect to a wide array of peripherals and external devices with ease. Furthermore, the inclusion of Bluetooth and Wi-Fi capabilities facilitates quick and reliable wireless connections, making it a versatile choice for those on the go.

Durability is a crucial characteristic that sets the Sterling 882.00291.00 apart from its competitors. The device features a sturdy build quality that can withstand daily wear and tear, making it suitable for both personal and professional environments. Additionally, the device is designed with energy efficiency in mind, offering an extended battery life that supports prolonged use without frequent recharging.

In terms of software, the Sterling 882.00291.00 comes equipped with an intuitive operating system that simplifies navigation and enhances user engagement. The user interface is designed to be accessible, allowing individuals of varying tech-savvy levels to operate the device comfortably. Regular updates ensure that users have access to the latest features and security protections.

In conclusion, the Sterling 882.00291.00 stands out for its blend of performance, connectivity, and durability. With its high-resolution display, robust processor, and thoughtful design, it serves as a reliable companion for anyone looking to enhance their digital experience. Whether for work or play, this device positions itself as a go-to option for those seeking quality and reliability.
Top Page Image Contents