![](/images/new-backgrounds/1153251/153251155x1.webp)
11.If it is necessary to replace the wireless antenna cable and transceiver:
a.Release the wireless antenna transceiver (1) from the display enclosure. (The wireless antenna transceiver is attached to the display enclosure with
b.Release the wireless antenna cable from the clips (2) built into the display enclosure.
c.Remove the wireless antenna cable and transceiver (3). The wireless antenna cable and transceiver are available in the Antenna Kit, spare part number
Reverse this procedure to reassemble and install the display assembly.
70 | Chapter 4 Removal and replacement procedures |