![](/images/new-backgrounds/1153178/153178129x1.webp)
6. If it is necessary to replace any of the display assembly internal components, remove the following screw covers and screws. The display rubber screw covers are included in the Display Rubber Kit, spare part number
(1)Six rubber screw covers on the display bezel top edge and bottom edge corners. The rubber screw covers are available in the Display Rubber Kit, spare part number
NOTE: There are two different sizes of display bezel rubber screw covers. The thicker covers (2) must be installed in the bottom center screw holes.
(2)Two rubber screw covers on the display bezel bottom edge.
(3)Eight Phillips PM2.5×7.0 screws.
7. Flex the inside edges of the left and right sides (1) and the top and bottom sides (2) of the display bezel until the bezel disengages from the display enclosure.
8. Remove the display bezel (3). The display bezel is available using spare part numbers
Component replacement procedures 57