HP 920AP, 955AP, 950AP, 943AP Using Compaq Diagnostics for Windows, Selecting from the Exit Screen

Setup Utilities and Diagnostics

Selecting from the Exit Screen

The command is followed by a confirmation prompt. Select Yes to confirm your exit command or No to return to the Setup Utility.

.

Select	To Do This
Exit Saving Changes	Save settings entered during current
	Setup Utility session, then exit and
	close the utility.
Exit Discarding Changes	Discard settings entered during
	current Setup Utility session, then
	exit and close the utility.
Load Setup Defaults	Replace all configuration settings in
	the Setup Utility with factory default
	settings. (Identification information is
	retained.)
Discard Changes	Discard settings entered during
	current Setup Utility session.
Save Changes	Save settings entered during current
	Setup Utility session.

Note: Pressing F9 replaces all settings on the Main screen with factory default settings. Pressing F10 saves settings and exits.

Using Compaq Diagnostics for Windows

When you open Compaq Diagnostics, a scan of all system components appears on the screen before the Compaq Diagnostics window opens.

You can display more or less information from anywhere within Compaq Diagnostics by selecting Level on the menu bar.

Compaq Diagnostics is designed to test Compaq components. If non-Compaq components are tested, the results may be inconclusive.

4–6 Software Guide